Teeth Whitening Mouth Trays Bleaching Thermo Gum Shield Teeth Grinding
Brand new and high quality.
Materials: thermoplastic copolymer.
Ideal for teeth whitening.
♦ Submerge the mouth trays into more than 80°C hot water for 5 seconds
♦ Remove the tray from the hot water and let it cool for 10 seconds.
♦ Place the trays on your teeth to form an impression.
♦ Trim the formed trays, cutting at the gum-line.
♦ Apply the whitening gel in each tray to whiten your teeth.
Size (app): 6.3m X 5cm – 2.48inch x 1.97inch.
Package Included: 4 Teeth Whitening Trays
Making method is as follows:1. Wear the tray to the upper gum, sucking method using exhaust air between the denture and the gums, making the denture wrap the entire surface of the whole row of the teeth. (Repeat twice which is an important process of making the tray)
Do the same with the lower tray.
2. Softening the tray: pour the 80 °C water into the ground vessel, water depth is enough to be able to remove the tray easily. Leave in the water outside if necessary, immerse the denture in the water for 5 to 7 seconds. (Denture is very soft at this point, so the immersion time should not be too long as it will make the denture soft and will result to an elongated form. 3. Making the mouthpiece: mouthpiece should be made carefully and quickly put on the tooth gum and sucking at the same time continue to do step 1. Finger pressed tooth denture to bond on the surface, making it thinner, while the top tight tongue and teeth denture inner surface. (Please be careful not to bite hard. The Mouthpiece is a little bit hot, but it will not cause any burn) The trim tray: Remove the tray that was finger pressed after 10-15 seconds, rinse with water. Imprint along the tray out of the gum line (that line between the teeth and gums) with scissors to cut the excess material, and finally cut off the handle. (Cut above the gum line section, it can only make contact with the tooth gel, avoid stimulating the gums)