3 pcs x syringe contained with 3ml gel ( TEETH WHITENING GEL JUST : 3 X 3ml GEL)
3pcs x Syringe caps
2 pcs x Thermoform arch trays.
1 x instruction manual
1 x shade guide card
1 x Led laser blue light (battery included)
Step 1: Make Impressions
Place the tray over the upper teeth without
placing the tray in boiling water. Practice with
your tongue on the roof of your mouth and touching
the inside of the tray. Suck the air from the tray.
This contours the guard to the inside surface of the teeth.
When finished repeat with the lower tray
Step 2: Tray Creation Begins
Bring water to a boil. The bowl should be at least
4″ deep to ensure the tray’s full immersion. Remove
the container from the heat and place one tray in
the hot but not boiling water. Leave the tray in water
for 5 seconds. Make sure the edges do not fold onto
Step 3: Make Impressions
Lift the tray vertically from the water using the tab.
Carefully and quickly place the tray around the teeth
and then immediately perform the procedure outlined in
Step 4: Cut off excess
Once you are satisfied with the fit, trim the front tab
away from the tray with scissors. Make sure it is flush
with the front surface of the tray.
Step 5: Apply Gel To Trays
Apply a “string” of teeth whitening gel along the front
inner surface of the trays which is the portion that comes
in contact with the front of your teeth.
Some people prefer dotting each tooth on the tray with gel,
however we prefer the “string” because it ensures the gel
gets in the crevices between the teeth.
There is no need to apply bleaching gel to the bottom or
rear inner surface of teeth bleaching trays because that
portion of your teeth is not visible.
One teeth whitening tray requires no more than 1/2 ml of
teeth whitening gel. Smaller mouths may require a little less.
Both trays combined should require about 1/4 to 1/3 of a 3 ml syringe.
Step 6: Insert Trays
When inserting your trays, try to do so in a forward pressing
motion so the teeth press into the gel versus a downward dragging
motion Begin with the rear of your teeth touching the rear of the trays to avoid
pushing the gel to the bottom of the trays,
thus allowing maximum contact with the front surface of your teeth.
Once the teeth in position pull the trays on to the front surface of
your teeth.Once contact is made set the trays in a locked positio
Step 7: Whiten Your Teeth
Included with your kit and the return of your custom teeth
whitening trays from our lab are detailed instructions for the
application of your teeth whitening gel will not leave you with
questions on the usage of your teeth whitening tray sand bleaching gel;
but should you have them were available on live chat and
phone so feel free to ask!How to use LED teeth whitening kit?
Step 8: Let The Gel Work
Our Teeth Whitening Gel Treatment times vary based on sensitivity levels and your schedule
but the “rule of thumb” is the longer you leave the gel in contact
with your teeth the quicker the results will appear.
Normal sessions last for a minimum of 20 minutes and a maximum
of 3 hours.
Gel complies with EU regulations
Please read the Terms and Conditions on our Website before Using this Whitening Kit ( Web Address at the bottom of the Instructions Included in the Kit )
By Purchasing this kit you accept the risks associated with tooth bleaching and release us and all Distributors and Manufacturers of Liability of any issues, complications associated with use of this product. It is advised that you obtain prior approval from a dentist before using this products
Also do not use the Teeth Whitening Gel if you are :
1. Under 18
2. Pregnant or breastfeeding
3. Wearing braces/retainers or they have been removed in the last 3 months
4. Going through major dental work
Do not let the gel get in contact with the gums or tongue
If any adverse reactions occur, discontinue use and consult your doctor or dentist